Product Description

Main features
1. In conformity to IEEE **2.3 *0 Base-T standard.
In conformity to IEEE **2.3u **0 Base-TX/FX standard.
2. Max. 2M buffer memory built in chip.
3. Back pressure flow control for full duplex IEEE**2.3 X and half duplex.
4. Automatic identification of MDI/MDI-X cross line.
5. High-performance1.4Gbps memory bandwidth.
6. In conformity to safety code of FCC and *5 CLASS A and CE MARK.

Technical parameters:
1. Standard Protocol: IEEE**2.3 *0 Base-T standard
IEEE **2.3u **0Base-TX/FX standard
2.Connector:oneUTPRJ**5connector,oneSC/STconnector
3. Operation mode: full duplex mode or half duplex mode
4. Power supply parameter: outside: 5V DC 2A
built-in: ******5V AC *8VDC
5. Environmental temperature: ***0
6. Relative humidity: 5%**0%
7. TP cable: Cat5 UTP cable
8. Transfer fiber:
multi-mode: *0/**5, *2.5/**5 or **0/**0um
single mode:: 8.3/**5, 8.7/**5, 9/**5 or *0/**5um
9. Dimensions:
External power supply: *5mmx *0mm x **5mm
Built-in power supply: *0mm x **0mm x **0mm

Cautions:
1. This product is suitable for indoor application.
2. Put on the dust cover of fiber interface when not used.
3. It is forbidden to stare at the TX fiber-transfer end with naked eyes.
4. Single optical fiber transceiver must be used in pair (See the attachment description in delivery).

Trouble shooting:
1. Device is not matched. Please select the corresponding network device according to the transfer rate of the product (*0Mbps or **0Mbps) when connected to other network devices (network card, hub, switch).
2. Line loss is excessive during the fiber wiring. Excessive loss in connector plug-in and fiber soldering welding, and excessive intermediate nodes may cause excessive loss rate or abnormal operation.